Construction Adhesive

Approx. Rs 2,450 / PieceGet Latest Price

Tenax Thassos- is a clear glue used for gluing and repairing the work of white marble joints and similar marble families such as Thassos and Carrara. This transparent adhesive has a high viscosity and excellent stability in sunlight. The application of this product on stones and marbles for joint filling and gluing is very easy to stir and spread. The hardened product is easily polishable.

Approx. Rs 450 / PieceGet Latest Price

High performance SBR based multipurpose polymer for waterproofing, repair and bonding

SikaLatex® Power is a latex-based, water-resistant multipurpose admixture for use in areas subject to humidity, dampness and continuous water contact. When added to cement mixtures, it improves water resistance and bonding strength by forming a reinforcing polymer that increases long term durability and flexibility of the mix. It is fully soluble in water and is to be added directly to the gauging water of mortar, concrete or cementitious grout.

Approx. Rs 650 / BagGet Latest Price

Approx. Rs 16,500 / PieceGet Latest Price

Approx. Rs 500 / KilogramGet Latest Price

Approx. Rs 60 / BagGet Latest Price

Approx. Rs 750 / KilogramGet Latest Price

Approx. Rs 1,200 / BagGet Latest Price

Approx. Rs 3,800 / PieceGet Latest Price

Additional Information:

• Item Code: AKEPOX1004
• Delivery Time: SAME DAY
• Packaging Details: 1 LTR

Approx. Rs 95 / KgGet Latest Price

Additional Information:

• Packaging Details: MYK LATICRETE GROUT

Approx. Rs 2,680 / LitreGet Latest Price

Tenax Cera Fluida is a clear liquid wax that is used to intensify and restore the polished effect on stones, granite, marble, and other similar materials. You can achieve a glossy effect on stones using Tenax Cera Fluida. Besides this, the product is also suitable for use on rough and brushed surfaces for a semi-matte finish. This liquid wax has a quick drying time that makes it a highly efficient product to get a glossy-looking stone material. It is also suitable for use in cold conditions as it has a fast drying time. The film created by using Tenax Cera Fluida is very hard and shows good resistance to external conditions.

How does Tenax Cera Fluida Work on the Material?
Tenax Cera Fluida enters the micro-porosities of the material due to its high penetration feature. This clear wax is mixed in solvent to create a polished and long-lasting effect on the material. An automatic waxing machine can be used for using this product. The mere application of Tenax Cera Fluida takes the glossiness of the material to a higher

Additional Information:

• Packaging Details: TENAX CERA FLUIDA SHINER

Approx. Rs 1,600 / BagGet Latest Price

• Nano-Impregnating technology
• Weather resistant
• Superior coverage
• Economical
• Easy to use
• UV resistant
• Low VOC after application

• Apply MaxiSeal uniformly over the surface till it is damp using a clean white cloth or paint brush
• Leave the treated surface 4-5 minutes and remove excess product from the surface using clean white cloth. The cleaning should be done before the liquid dries on the surface
• In case any dried residue is left on the surface, the same can be removed by reapplication of MaxiSeal and cleaning the excess immediately. Multiple applications may be required for some stones
• Allow cure time of 24-72 hours (Air Cure) for sealers to become completely effective

Additional Information:

• Item Code: MAXISEALER
• Delivery Time: 1 day
• Packaging Details: 1 ltr, 5 ltr

Approx. Rs 650 / BagGet Latest Price

Approx. Rs 2,035 / BagGet Latest Price

Additional Information:

• Item Code: TileJointing
• Packaging Details: 25 kg Bag

Approx. Rs 890 / BagGet Latest Price

Established in the year 1995, in Ahmedabad (Gujarat, India), we “Sai Krupa Traders” are engaged in trading, exporting and supplying an extensive range of construction Chemicals, Tile Adhesive , Epoxy Grout, Waterproofing chemical, Epoxy, Power Tool Machines , Cutting Grinding Machine, Abrasives, Marble Cutter  many more products.

Additional Information:

• Packaging Details: 25 KG BAG

Approx. Rs 1,360 / KgGet Latest Price

Tenax Glue Mastic Marble And Stone Adhesive, Packaging Size: 1.5 Kg

• Tenax Mastic 3G Coloured Solid has low shrinkage.
• Tenax marble and stone filling glue has excellent adhesion.
• It has excellent reactivity to colder as well as hotter temperatures.
• The product has a good shelf life.

Additional Information:

• Packaging Details: TENAX MARBLE GLUE

Approx. Rs 1,180 / BagGet Latest Price

Additional Information:

• Item Code: ROFFT08
• Production Capacity: FOR STONE

Approx. Rs 375 / BagGet Latest Price

• Roff New Construction Tile Adhesive is polymer modified cement base powder tile adhesive.It is grey coloured powder & as name suggest this product is most suitable for wall tiling on plastered wall & floor tiling on PCC/IPS substrate by substituting conventional method of cement & sand.

• Fixing all types of tiles on internal/External floor & ceramic tiles on wall.

• Crack, breakage free firm surface that preserves beauty of tiling for longer time 
• Excellent waterproofing characteristics
• Ready to use, needs no curing 
• Excellent adhesion, low shrinkage
• Sufficiently flexible to accommodate thermal & physical movements 
• Quick tiling benifits contractors & consumers in terms of time saving.

• The substrate to be tiled must be hard PCC or IPS substrate without undulations & levelling. 
• The surface to be tiled should be sound and thoroughly cleaned. Surface should be free from wax, grease, polish etc.
• Add 3 to 3.5 parts of powder to 1 part of water. 
• Mix with a trowel or slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained. 
• Always mix the required quantity, which can be consumed within 60 min. pot life. 
• Leave mixture for 5 min. before using. } Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 10 to 15 mins. 
• Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat. 
• Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids. 
• Keep joints between two-tiles using spacers. 
• Start filling joints only after 24 hrs.with Roff Rainbow Tile Mate.

• The surface to be tiled should be sound and thoroughly cleaned.
• The surface to be tiled should be sound and thoroughly cleaned. Surface should be free from wax, grease, polish etc.
• Add 3 - 3.5 parts of powder to 1 part of water. 
• Mix with a trowel / slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained. 
• Always mix the required quantity, which can be consumed with in 60 - 90 min. pot life. 
• Leave mixture for 5 min. before using.
• Spread the adhesive to a required thickness and comb with a suitable notched trowel. Strictly apply the adhesive paste which can be tiled within 10 to 15 mins.
• Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat. 
• Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids. 
• Keep joints between two-tiles using spacers. 
• Start filling joints only after 24 hrs. with Roff Rainbow Tile Mate

• For laying tiles on floor, surface should be sufficiently hard & good condition.
• Always add powder to water & never add water to powder. 
• Do not add excess water than recommended. 
• Never add sand & cement at site.
• Strictly not recommended for tiling on gypsum plaster, paint,wood& metal. 

Additional Information:

• Item Code: T01
• Delivery Time: 1 day

Approx. Rs 4,630 / BagGet Latest Price

Approx. Rs 1,280 / BagGet Latest Price

Established in the year 1995, in Ahmedabad (Gujarat, India), we “Sai Krupa Traders” are engaged in trading, exporting and supplying an extensive range of construction Chemicals, Tile Adhesive , Epoxy Grout, Waterproofing chemical, Epoxy, Power Tool Machines , Cutting Grinding Machine, Abrasives, Marble Cutter  many more products

Additional Information:

• Packaging Details: MAPEI ADESILEX P10 WHITE TILE ADHESIVE 25 KG BAG

Approx. Rs 800 / BagGet Latest Price

Additional Information:

• Packaging Details: JOLLY SOLID AND LIQUID MASTIC 1.5 KG

Approx. Rs 1,200 / PieceGet Latest Price

Tenax Solido 1 Litre Epoxy Filler – Bianco White Tenax Solido is a high quality polyester mastic used to horizontally repair, rebuild, glue and fill marble and quartz surfaces. Tenax Solido will cure shiny and is very polishable. Not suitable for temperatures below 0-C. Recommended for interior use. Other colours available. Instructions: Make sure the surface to be treated is dry, clean and free of dust. If colouring, add the colouring paste to the resin before mixing it with the catalyst. An excess of colouring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2-3% in weight. Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use. Technical Specifications: Gel time in bulk at 25-: 3-4 min. Tacky free time at 25-: 15-25 min. Working time at 25-: 60-80 min. Temp range for use after hardening 0- to 110- Ratio of glue to hardener: 100/2-3% in weight

Additional Information:

• Packaging Details: TENAX SOLIDO AND LIQUID BIANCO AND PAGELIRINO ADHESIVE GLUE

Approx. Rs 4,900 / BucketGet Latest Price

Additional Information:

• Item Code: DUO
• Production Capacity: Stain-free epoxy grout for interior & exterior floor & wall
• Delivery Time: SAME DAY
• Packaging Details: 1 KG, 5 KG

Approx. Rs 1,350 / BagGet Latest Price

The multipurpose high polymer, flexible modified thin-set mortar for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and brick. LATICRETE® 335 Super Flex Multipurpose Floor & Wall Tile Adhesive is designed to mix with water, has a convenient open time with high adhesion and workability.

Additional Information:

• Item Code: L335
• Delivery Time: SAME DAY
• Packaging Details: 20 KG, 50 KG

Approx. Rs 650 / BagGet Latest Price

Polymer fibre modified grey cement based adhesive with no vertical slip, suitable for fixing ceramic and gres tiles for floors and walls in internal applications.

Additional Information:

• Packaging Details: 20 kg bag

Approx. Rs 1,850 / BagGet Latest Price

Approx. Rs 750 / BagGet Latest Price

Additional Information:

• Item Code: RoffT03
• Delivery Time: Same Day

Approx. Rs 850 / KgGet Latest Price

Approx. Rs 580 / KgGet Latest Price

Additional Information:

• Packaging Details: MYK LATICRETE 111 BAG

Approx. Rs 1,350 / BagGet Latest Price

Approx. Rs 8,850 / PieceGet Latest Price

Myk laticrete dazzle epoxy grout

Additional Information:

• Packaging Details: LATICRETE DAZZLE EPOXY 1 KG, 5 KG,

Approx. Rs 1,080 / BagGet Latest Price

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: 20 KG BAG

Approx. Rs 790 / BagGet Latest Price

Additional Information:

• Delivery Time: 1 day
• Packaging Details: 2o kg bag

Approx. Rs 1,300 / BagGet Latest Price

Additional Information:

• Delivery Time: any time
• Packaging Details: 20 kg bag

Approx. Rs 5,800 / BagGet Latest Price

Eco-friendly, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives, ideal for use in Green Building. Single-component with low CO2 emissions and very low volatile organic compound emissions. Recyclable as an inert material at the end of its life.
Nanoflex® Eco develops a smooth, fluid mixture that can be adjusted by varying the amount of water in order to obtain optimal workability for the particular site conditions, guaranteeing maximum adhesion of the bonded system.
APPLICATION

Floors and walls for internal and external use.

Crack bridging ability.

Specifically intended for laying ceramic tiles, natural stone and glass mosaic using adhesives from the H40® range.

Suitable for overlaying.

30% better coverage than two-component system.

20 kg papaer bag with carrier handle.

Nanotech technology which makes it completely water repellent and gives permanent elasticity and high chemical stability.

COVERAGE
1.15 kg/sq mtr per mm of thickness.

Approx. Rs 5 / Square FeetGet Latest Price

Approx. Rs 250 / KgGet Latest Price

Additional Information:

• Packaging Details: ATUL PRODUCT POLYGRIP SR 409

Approx. Rs 2,000 / LitreGet Latest Price

Additional Information:

• Packaging Details: The colourless acrylic coating provides long-term protection and is water- and dirt-resistant. It is used to seal porous and absorbent surfaces. Colours and structures appear more intensive. On account of the sealed surface, the stone is easier to care for. Preferably used indoors

Approx. Rs 1,250 / LitreGet Latest Price